Product Description Zubat handsaws are the handsaws of choice for many arborists in the tree maintenance and removal business. The Zubat blade is impulse hardened and is, what is called, a full tang blade. This means that the blade and handle are in one piece with a rubber GOM handle that slides over the tang and is held in place by two screw sets. This makes a very strong saw as there is no weak point where the blade is joined to the handle. The Zubat is a pull saw, it cuts as you pull the saw towards you. The benefit of this is that the blade is not as thick as on a saw that you push because it is very difficult to pull a piece of steel and break it. Combine the pull action with the full tang blade and you have a very efficient saw that doesn't require as much effort to cut with. The impulse hardening keeps the Zubat teeth sharper for longer. A sharpenable blade will be sharpened three to four times in the life of a non-sharpenable Zubat blade. 270mm, 300mm or 330mm blade length. Key Features 7.5 teeth per 30mm 270mm, 300mm or 330mm length blade Chrome plated, taper ground blade Electrical induction hardened teeth Low effort triple edge, non-set tooth design Superior finish quality